|
|
|
fishmark
Member
Reged: 07/06/07
Posts: 43
Fish Bucks: $1.86
Loc: Ramsey, MN
|
|
Have a Dual Pro Charger, 2 banks, 15 amps each. Has been in boat for 6 years. One bank works intermittently. Know I have to replace it, was thinking of purchasing a 3 bank so starting battery will also be charged.
Here's the problem. How do I remove the Dual Pro? I have a Lund 1775 ProV, the charger is mounted on the port side of the rod locker in it's own little box area. I see six cross tip heads, I can turn one and nothing happens it just spins, can't turn the other five. Don't know if it's a striped out screw or bolt with a nut. There doesn't seem to be a way behind the charger without taking half the boat apart. Sure hope they didn't bolt it in before the floor was installed, that would not be good! Is there a cover on the charger that comes off, giving me access behind it? Any help would be much appreciated. Thanks
|
Sliderfishn
IDA Field Staff
Reged: 04/01/04
Posts: 3789
Fish Bucks: $75.70
Loc: Blaine, MN
|
|
Dual Pro has fantastic customer service, contact them about rebuilding your currant one OR upgrading to a three bank charger. I think it costs me $75 to upgrade mine when it finally went out.
Ron
--------------------
I'm not a complete idiot, some parts are missing.
|
smithkeith
Member
Reged: 06/19/01
Posts: 137
Fish Bucks: $2.74
Loc: Waterloo, Iowa
|
|
Are you sure that it is the charger? I thought that one bank was going out of mine a couple of years ago and turned out to be the battery going bad. Might want to switch the batteries around first to be sure that it is the charger.
|
|
|
|
| © Copyright In-DepthOutdoors.com, Inc. 2001 - 2008, All Rights Reserved.
|
|
|
|
|
On board charger, one bank going belly up
