Welcome Guest... Login?
 
 
 « BACK Outdoor Gear Forum

B Robinson

MinnKota foot pedal problem/solution


Took my foot pedal to work last night and took it apart, so if you've never seen one apart, like me, then here ya go. Not much to them, actually. This is a PowerDrive 55 model, and when I turn left, it goes left. When I turn right, well....not so much. By looking at it last night, I'm putting my money on the sliding mechanism not, well, sliding. I tried my buddy's foot pedal, and my motor worked like new, so I know it's not the connection point. After actually seeing this up close, I'm sure it's gotta be either the sliding part or the circuit board. Most parts in there are fairly dirty, and I'm hoping a good cleaning will take care of it. My question is, what would you recommend to spray in there to clean it up?
The first thing that comes to mind is WD40, but I'm afraid of it attracting dust afterwards and making it gummy. These pieces are plastic, so I need something that won't harm it. Basically, what I want to do is spray it up, make it clean again, then I'm thinking of spraying some silicone lube in there of some sort, and see if that makes things slide easier.
What do you guys have for suggestions? Thanks--

1242302220_0514090306a.jpg


--------------------
B Rob


Jerry Brink

Re: MinnKota foot pedal problem/solution


Hey bud-
It'd be my guess to clean it up with something that leaves no residue and call it good. Silicone and WD40 all leave a film that will re-collect dirt and you'll be back in the same predicament. jerr


Doug Mercer

Re: MinnKota foot pedal problem/solution


Brian, I just took mine apart & I used a Q-tip to get most of the dust off of it. I also used a q-tip with a little vaseline to wipe in the moving parts. Mine works like new. Don't know if this will help you out.

--------------------
DOUG MERCER IDO FIELD STAFF
MrMuskie


Drew H.

Re: MinnKota foot pedal problem/solution


I have the same mdl. I had trouble all last summer. It was under warranty so had it replaced this spring. I tried cleaning it and still was bad.

--------------------
There are two kinds of people in this world "Givers and Takers" "How can I help you"


jon wbl

Re: MinnKota foot pedal problem/solution


You can buy cans of electrical parts cleaner. Similar to brake clean but safe for circuit boards. This will wash off all the crud and dry with no residue.

Gill-Eye

Re: MinnKota foot pedal problem/solution


Buy a copilot you will never want to use that foot pedal

wiswalleyenut

Re: MinnKota foot pedal problem/solution


Having some problems myself. Jon do you use water to rinse off after spraying with the cleaner? Or does the cleaner just do the job?

Thanks,
Nut

--------------------
Never miss an opportunity to shut up!


B Robinson

Re: MinnKota foot pedal problem/solution


Thanks guys. I'm most interested in cleaning it with some sort of solvent just to get it all nice and shiny clean again. I'm thinking that might help. But where the help is really needed is in the two sliding plastic pieces. So I'd like to get something to spray in there that won't harm it, but will make it clean and slide easier. I'll see what I can find. Thanks again--

--------------------
B Rob


lots of luck

Re: MinnKota foot pedal problem/solution


Here's your solution, cable drive.

Too bad they have a monopoly and keep building those garbage powerdrive pedals.


dandorn

Re: MinnKota foot pedal problem/solution


Quote:

Buy a copilot you will never want to use that foot pedal




I'll second the co-pilot.

I haven't used a pedal in years and don't even

pack it any longer.


*Nick*

Re: MinnKota foot pedal problem/solution


There might be some help in you email (the ido one)

Whiskerkev

Re: MinnKota foot pedal problem/solution


I like the speed control on my foot pedal and also use the copilot often. If you have a bad ankle like I do cable drives hurt to operate. My PD is 7 years old and I've had to buy 1 new foot pedal which is going strong.

B Robinson

Re: MinnKota foot pedal problem/solution


Thanks Nick!

I'll give em a look through.

--------------------
B Rob


DavidLuna

Re: MinnKota foot pedal problem/solution


Sorry to let you know, but I had the same issue. Spend the 90.00 dollars or so for a new pedal(minnkota is notorious for these pedal circuit boards to go out,it is the board.

B Robinson

Re: MinnKota foot pedal problem/solution


Ya, I kinda gave up on it myself. Have since moved on to a Terrova with iPilot, and to be honest....don't even have the foot pedal in the boat.

Sure hope yours is working to get you some fish!

--------------------
B Rob


Kungpaoshizi

Re: MinnKota foot pedal problem/solution


Old post yes, but I thought I would say I had the issue with the pinholes on the top of the buttons. The unit would not turn to the left, everything else worked fine.

The hardest part of disassembly is sliding the top white plastic all the way to the right, and then somewhat pulling it up away from the back base, and then getting it to slide back left, up and away from the rest of the unit.
When you slide the top white piece to the right, you're sliding it across the notch, so it will be tough, and then tough again sliding it back left to pull it out.
I found if you move it laterally up and down against the back while pulling outward, it will wiggle out.

Then you can peel back with an exacto knife, the outter clear layer away from the circuit board.
Do it slowly and carefully as to not pull up the copper in the circuit board. Once far enough, you can use vinegar and q-tips to clean it well.
Then just use tiny lines of super glue to adhere the clear layer back over the circuit board.

The big thing to remember is move slow! The metal "tabs" that ARE the buttons are not adhered to the circuit board. They're very small and fragile so don't bend them.

There were also holes developing on other buttons, but I just used some liquid electric tape, and gave each button a nice extra layer. I didn't do the variable speed strip though, as that might require something like clear fingernail polish because the friction would just rip up the electric tape most likely...

Once getting it all glued and slowly assembled, it turned left! lol

I'll post some pics after getting them off my phone, but ya, thought I would share. I got the trolling motor off a guy on c-list the other day and got out on the water to discover this.. :/ (he offered a refund but I figured I would tear into it and if it didn't go well I would just get the remote control)


bassfishin

Re: MinnKota foot pedal problem/solution


So I'm having this same issue with my foot pedal. Studying electronics at school I thought I'd take it apart and see what I'm working with. The problem is the circuit board. The sliding portion just adjusts your speed and varies resistance in current to the board. This is not the issue. It's a pushbutton contact on the board that gets corroded and stops working. Problem is I can't find a replacement board for it without buying a while new pedal.

Mike W

Re: MinnKota foot pedal problem/solution


New pedals at fishelectronics run about $45 bucks. Not a overly expensive repair.

--------------------
Mike Westman -612-501-7089
www.HomeTownplumbing.net
Guided Walleye trips on Pool 2



Copyright In-DepthOutdoors.com, Inc. 2001 - 2014, All Rights Reserved.